您好,欢迎来到零爱网!
免费注册
我的零爱 | 帮助中心 | 400-888-9081
工业百科
通用零部件行业标准规范英汉对照(1-100)
2021-09-04

1 GB/T 2-1985 紧固件 外螺纹零件的末端 Fasteners--Ends of parts with external thread

2 GB/T 8-1988 方头螺栓 C级 Square head bolts--Product grade C

3 GB/T 10-1988 沉头方颈螺栓 Flat countersunk square neck bolts

4 GB/T 11-1988 沉头带榫螺栓 Flat countersunk nib bolts

5 GB/T 12-1988 半圆头方颈螺栓 Cup head square neck bolts

6 GB/T 13-1988 半圆头带榫螺栓 Cup head nib bolts

7 GB/T 15-1988 大半圆头带榫螺栓 Cup head nib bolts with large head

8 GB/T 22-1976 小六角头导颈螺栓 Bolts, small hexagon head with fit neck

9 GB/T 23-1976 小六角头螺杆带孔螺栓 Bolts, small hexagon head with hole through the shank

10 GB/T 24-1976 小六角头螺杆带孔导颈螺栓 Bolts, small hexagon head with fit neck and hole through the shank

11 GB/T 25-1976 小六角头头部带孔螺栓 Bolts, small hexagon head with holes through the head

12 GB/T 26-1976 小六角头头部带孔导颈螺栓 Bolts, small hexagon head with fit neck and holes through the head

13 GB/T 27-1988 六角头铰制孔用螺栓 A和B级 Hexagon fit bolts--Product grade A and B

14 GB/T 28-1988 六角头螺杆带孔铰制孔用螺栓 A和B级 Hexagon fit bolts with Split pin hole on shank--Product grade A and B

15 GB/T 29.1-1988 六角头头部带槽螺栓 A和B级 Hexagon bolts with slot on head--Product grade A and B

16 GB/T 29.2-1988 十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation

17 GB/T 31.1-1988 六角头螺杆带孔螺栓 A和B级 Hexagon bolts with split pin hole on shank--Product grade A and B

18 GB/T 31.2-1988 六角头螺杆带孔螺栓 细杆 B级 Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B

19 GB/T 31.3-1988 六角头螺杆带孔螺栓 细牙 A和B级 Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B

20 GB/T 32.1-1988 六角头头部带孔螺栓 A和B级 Hexagon bolts with wire holes on head--Product grade A and B 21 GB/T 32.2-1988 六角头头部带孔螺栓 细杆 B级 Hexagon bolts with wire holes on head--Reduced shank--Product grade B

22 GB/T 32.3-1988 六角头头部带孔螺栓 细牙 A和B级 Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B

23 GB/T 35-1988 小方头螺栓 B级 Square head bolts with small head--Product grade B

24 GB/T 37-1988 T型槽用螺栓 Bolts for T-Slot

25 GB/T 38-1976 螺栓 技术条件 Bolts--Technical requirements

26 GB/T 39-1988 方螺母 C级 Square nuts--Product grade C

27 GB/T 41-1986 1 型六角螺母 C 级 Hexagon nuts--Style 1--Product grad C

28 GB/T 56-1988 六角厚螺母 Hexagon thick nuts

29 GB/T 61-1976 螺母 技术条件 Nuts--Technical requirements

30 GB/T 62-1988 蝶形螺母 Wing nuts

31 GB/T 63-1988 环形螺母 Lifting nuts

32 GB/T 65-1985 开槽圆柱头螺钉 Slotted cheese head screws

33 GB/T 67-1985 开槽盘头螺钉 Slotted pan head screws

34 GB/T 68-1985 开槽沉头螺钉 Slotted countersunk head screws

35 GB/T 69-1985 开槽半沉头螺钉 Slotted raised countersunk head screws

36 GB/T 70-1985 内六角圆柱头螺钉 Hexagon socket cap head screws

37 GB/T 71-1985 开槽锥端紧定螺钉 Slotted set screws with cone point

38 GB/T 72-1988 开槽锥端定位螺钉 Slotted set screws with cone point

39 GB/T 73-1985 开槽平端紧定螺钉 Slotted set screws with flat point

40 GB/T 74-1985 开槽凹端紧定螺钉 Slotted set screws with cup point

41 GB/T 75-1985 开槽长圆柱端紧定螺钉 Slotted set screws withlong dog point

42 GB/T 77-1985 内六角平端紧定螺钉 Hexagon socket set screws with flat point

43 GB/T 78-1985 内六角锥端紧定螺钉 Hexagon socket set screws with cone point

44 GB/T 79-1985 内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point

45 GB/T 80-1985 内六角凹端紧定螺钉 Hexagon socket set screws with cup point

46 GB/T 83-1988 方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded end

47 GB/T 84-1988 方头凹端紧定螺钉 Square set screws with cup point

48 GB/T 85-1988 方头长圆柱端紧定螺钉 Square set screws with long dog point

49 GB/T 86-1988 方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end

50 GB/T 89-1976 螺钉 技术条件 Screws--Technical requirements




51 GB/T 90-1985 紧固件验收检查、标志与包装 Acceptance inspection,marking and packaging of fasteners

52 GB/T 91-1986 开口销 Split pins

53 GB/T 93-1987 标准型弹簧垫圈 Single coil spring lock washers--Normal type

54 GB/T 94.1-1987 弹性垫圈技术条件 弹簧垫圈 Specifications for spring washers--Single coil spring lock washers

55 GB/T 94.2-1987 弹性垫圈技术条件 齿形、锯齿锁紧垫圈 Specifications for spring washers--Toothed lock and serrated lock washers

56 GB/T 94.3-1987 弹性垫圈技术条件 鞍形、波形弹性垫圈 Specifications for spring washers--Curved and wave spring washers

57 GB/T 95-1985 平垫圈-C级 Plain washers--Product grade C

58 GB/T 272-1993 滚动轴承 代号方法 Rolling bearing--Identification code

59 GB/T 273.1-1987 滚动轴承 圆锥滚子轴承 外形尺寸方案 Rolling bearings Tapered roller bearings--Boundary dimensions

60 GB/T 273.3-1988 滚动轴承 向心轴承 外形尺寸方案 Rolling bearings Radial bearings-Boundary dimensions

61 GB/T 274-1991 滚动轴承 装配倒角极限 Rolling bearing chamfer dimension limits

62 GB/T 275-1993 滚动轴承与轴和外壳的配合 Shaft and housing fits for rolling bearings

63 GB/T 276-1994 滚动轴承 深沟球轴承 外形尺寸 Rolling bearings--Deep groove ball bearings--Boundary dimensions

64 GB/T 280-1964 带毡封圈的单列向心球轴承 结构型式和基本尺寸 Rolling bearings--Single-row radial ball bearings withfelt seals--Types and basic dimensions

65 GB/T 281-1994 滚动轴承 调心球轴承 外形尺寸 Rolling bearings--Self-aligning ball bearings--Boundary dimensions

66 GB/T 283-1994 滚动轴承 圆柱滚子轴承 外形尺寸 Rolling bearings--Cylindrical roller bearings-Boundary dimensions

67 GB/T 285-1994 滚动轴承 双列圆柱滚子轴承 外形尺寸 Rolling bearings--Double row cylindrical roller bearings-Boundary dimensions

68 GB/T 286-1964 双列向心球面滚子轴承 结构型式和基本尺寸 Rolling bearings--Double -row radial spherical roller bearings--Types and basic dimensions

69 GB/T 288-1994 滚动轴承 调心滚子轴承 外形尺寸 Rolling bearings--Self-aligning roller bearings-Boundary dimensions

70 GB/T 289-1964 滚针轴承 结构型式和基本尺寸 Needle roller bearings--Types and basic dimensions

71 GB/T 291-1964 螺旋滚子轴承 结构型式和基本尺寸 Rolling bearings with helically wound cylindrical rollers--Types and basic dimensions

72 GB/T 292-1994 滚动轴承 角接触球轴承 外形尺寸 Rolling bearings--Angular contact ball bearings--Boundary dimensions

73 GB/T 294-1994 滚动轴承 三点和四点接触球轴承 外形尺寸 Rolling bearings--Three point and four point contact ball bearings--Boundary dimensions

74 GB/T 296-1994 滚动轴承 双列角接触球轴承 外形尺寸 Rolling bearings--Double row angular contact ball bearings--Boundary dimensions

75 GB/T 297-1994 滚动轴承 圆锥滚子轴承 外形尺寸 Rolling bearings--Tapered roller bearings--Boundary dimensions

76 GB/T 299-1995 滚动轴承 双列圆锥滚子轴承 外形尺寸 Rolling bearings--Metric double row tapered roller bearings--Boundary dimensions

77 GB/T 300-1995 滚动轴承 四列圆锥滚子轴承外形尺寸 Rolling bearings--Four row tapered roller bearings--Boundary dimensions

78 GB/T 301-1995 滚动轴承 推力球轴承 外形尺寸 Rolling bearings--Thrust ball bearings--Boundary dimensions

79 GB/T 304.1-1988 关节轴承 分类 Spherical plain bearings Classification

80 GB/T 304.2-1988 关节轴承 代号方法 Spherical plain bearings Identification code

81 GB/T 304.3-1990 关节轴承 配合 Spherical plain bearings-Fits

82 GB/T 304.9-1981 向心关节轴承 技术条件 Spherical plain radial bearings, joint type--Technical requirements

83 GB/T 304.10-1989 关节轴承公差 Spherical plain bearings-Tolerances

84 GB/T 307.1-1994 滚动轴承 向心轴承 公差 Rolling bearings--Radial bearings--Tolerances

85 GB/T 307.2-1995 滚动轴承 测量和检验的原则及方法 Rolling bearings--Measuring and gauging principles and methods

86 GB/T 307.3-1996 滚动轴承 通用技术规则 Rolling bearings--General technical regulations

87 GB/T 307.4-1994 滚动轴承 推力球轴承 公差 Rolling bearings--Thrust ball bearings--Tolerances

88 GB/T 308-1989 滚动轴承 钢球 Rolling bearings-Steel balls

89 GB/T 309-1984 滚动轴承 滚针 Rolling bearings--Needle rollers

90 GB/T 794-1993 加强半圆头方颈螺栓 Strengthened cap head square neck bolts

91 GB/T 798-1988 活节螺栓 Eye bolts

92 GB/T 799-1988 地脚螺栓 Eyelet bolts

93 GB/T 800-1988 沉头双榫螺栓 Flat countersunk double nib bolts

94 GB/T 802-1988 组合式盖形螺母 Acorn nuts

95 GB/T 804-1988 球面六角螺母 Hexagon nuts with raised face

96 GB/T 805-1988 扣紧螺母 Tight nuts

97 GB/T 806-1988 滚花高螺母 Knurled nut with collar

98 GB/T 807-1988 滚花薄螺母 Knurled nuts

99 GB/T 808-1988 小六角特扁细牙螺母 Small hexagon thin nuts-Fine pitch thread

100 GB/T 809-1988 嵌装圆螺母 Insert round nuts